SciELO - Scientific Electronic Library Online

 
vol.20 número3-4Processo para a diminuição da massa volúmica em produtos de cortiça naturalMaterial Selection for Aeronautical Structural Application índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ciência & Tecnologia dos Materiais

versão impressa ISSN 0870-8312

C.Tecn. Mat. v.20 n.3-4 Lisboa dez. 2008

 

Synergistic inhibition of zinc corrosion by some anions in aqueous media

 

A.S.El-Gaber a A.S. Fouda* b, A.M. El Desoky b.

 

aChemistry Department, Faculty of Science, Qatar University,Doha- P.O.Box-2713, Qatar.

b* Chemistry Department, Faculty of Science, El- Mansoura University, El- Mansoura-35516, Egypt. E-Mail: asfouda48@yahoo.com

 

 

Abstract.

The corrosion inhibition of zinc in 0.1M HCl in presence and absence of some hydrazide derivatives has been investigated using mass-loss and polarization techniques. Results obtained showed that the inhibition efficiency increased with the increase of the concentration of the additives and decreased with the increase of temperature. Synergism between I- , SCN- and Br- anions and hydrazide derivatives was proposed. The polarization curves showed that hydrazide derivatives act as mixed-type inhibitors, acting predominantly as cathodic inhibitors for zinc in 0.1M HCl .The adsorption of these hydrazide derivatives on zinc surface follows Temkin’s adsorption isotherm. Some thermodynamic parameters were calculated. The kinetic parameters of corrosion of zinc in HCl solution have been studied.

Keywords: corrosion inhibition, zinc, synergism, HCl, hydrazide derivatives.

 

 

Full text only available in PDF format.

Texto completo disponível apenas em PDF.

 

 

REFERENCES

[1] C. B.King; M.M.J. Braverman, ,Am. Chem.. Soc., 54 (1932)1744.         [ Links ]

[2] C. W.Bergamann; U. R. Evans, Trans. Electrochem. Soc. 65(1932) 249.

[3] G. Bianchi, Corrosion , 14 (1958) 245.

[4] I.Sekerka; K. Smreek, , Czech. Chem. Comm., 22 (1957)712.

[5] Ya.Kolotyrkin; M. Lorionovich, G. M.Ilogi, ,Nauk, Electrokhimiya Russia, 6(1971) 5.

[6]Evans, U.R. The corrosion and oxidation of metals, Edward Arnold, London,  86 (1959)

[7] S.Kawai, H.Kato,; T. Hayakawa, Denki kagaku Oyobi Kogyo Butsuri Kagaku, 39 (4)(1971)28.

[8] V.P.Grigorev; V.V. Ekilik, , Protection of metals , 4(1968)1.

[9] N. subramanyam,; k.Ramakrishnaiah, ,Indian J. Technol, 8(1970)369.

[10] S. P.harma; I.N. Gaur ,J.,Electrochem. Soc. India , 25 (A) (1976)138.

[11] B.L.Jain; j.N. Gaur, Trans. SAEST, , 13 (1)(1978)63

[12] H.B.Rudresh, and S.M .Mayanna, J.Electrochem.Soc.,  124(1977) 340.

 [13] S.M.  Mayanna, J.Electrochem.Soc., 122(1975)251.

 [14] Cavallavo; Bolognesi, GAtt. ,Acd. Sci., Ferrara, 1(1947)

[15] V.A. Kuzntnov,; Z.A. loafJ., Phys. Chem. (U.S.S.R.), 21(1957)201.

[16] G. Schmilt, , and K. Bedbur, Werkst. Ü.Korros., 36( 1985) 273

[17] E. Khamis, E.S.H. El- Ashry, and A.K. Ibrahim ., Br. Corros.J. 35(2000)2

[18] Y.A.  El- Awady, and A.I.Ahmed, J. Ind. Chem., 24 . (1985)601

[19] A.S.Fouda, M.N.Moussa, T F.I.aha, and Elneanaa, A.I., Corros., Sci., 26(1986) 719.