SciELO - Scientific Electronic Library Online

 
vol.20 número1-2Advanced high temperature materials: Aeroengine fatigueResisting metal fatigue in aeroengines, surface damage and surface treatments índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ciência & Tecnologia dos Materiais

versão impressa ISSN 0870-8312

C.Tecn. Mat. v.20 n.1-2 Lisboa jan. 2008

 

Bulk nanostructured shape memory alloys

 

Thomas Waitz

 

Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna, Austria. thomas.waitz@univie.ac.at

 

ABSTRACT: This paper starts with a brief introduction to bulk nanostructured materials. Bulk nanocrystalline materials processed by methods of severe plastic deformation show mechanical properties and phase structures that can differ significantly from those of their coarse grained counterparts. In the case of NiTi shape memory alloys, a nanocrystalline structure is obtained via the devitrification of an intermediate amorphous phase induced by high pressure torsion. Grain sizes in the range of 5 to 350 nm are achieved that are free of strains and of crystal defects. The small grain size significantly impacts the martensitic phase transformation that causes unique thermomechanical properties such as the shape memory effect and superelasticity. Experimental results on the enhanced mechanical properties of nanocrystalline and ultrafine grained NiTi shape memory alloys are shortly reviewed. 

Keywords: Nanostructures, Severe plastic deformation, Shape memory alloys, Martensite, Size effect

 

RESUMO: É feita inicialmente uma breve introdução aos materiais nanoestruturados. Materiais nanocristalinosprocessados impondo grandes deformações plásticas revelam propriedades mecânicas e estruturas de fase que podemdiferir significativamente dos materiais de grão grosseiro. No caso de ligas de memória de forma NiTi, uma estruturananocristalina pode ser obtida por devitrificação de uma fase intermédia amorfa induzida por torsão e alta pressão.Tamanhos de grão da ordem dos 5 aos 350 nm são obtidos livres de deformação e de defeitos cristalinos. O tamanho degrão pequeno tem impacto significativo sobre a transformação da fase martensite, causando propriedades termomecânicasúnicas, tais como efeito de memória de forma e superplasticidade. São concisamente descritos resultados experimentaisrelativos à melhoria das propriedades mecânicas de ligas de memória de forma nanocristalinas e de grão ultrafino NiTi

Palavras chave: nanoestruturas; deformação plástica severa, ligas de memória de forma, martensite, efeito de tamanho

 

Texto completo disponível apenas em PDF.

Full text only available in PDF format.

 

REFERENCES

[1] S. X. McFadden, R. S. Mishra, R. Z. Valiev, A. P. Zhilyaev and A. K. Mukherjee, Nature 398 (1999) 684.        [ Links ]

[2] Y. M. Wang, M. Chen, F. Zhou and E. Ma, Nature 419 (2002) 912.

[3] C. C. Koch, Scripta Mater. 49 (2003) 657.

[4] H. Gleiter, Acta Mater. 48 (2000) 1.

[5] K. S. Kumar, H. Van Swygenhoven and S. Suresh, Acta Mater. 51 (2003) 5743.

[6] C. C. Koch, J. Mater. Sci. 42 (2007) 1403-1414.

[7] R. Z. Valiev, R. K. Islamgaliev and I. V. Alexandrov, Progr. Mater. Sci. 45 (2000) 103.

[8] G. Wilde, N. Boucharat, R. Hebert, H. Rösner and R. Z. Valiev, Mater. Sci. Eng. A 449–451 (2007) 825.

[9] M. Dao, L. Lu, R. J. Asaro, J. T. M. De Hosson and E. Ma, Acta Mater. 55 (2007) 4041.

[10] M. Chen, E. Ma, K. J. Hemker, H. Sheng, Y. Wang and X. Cheng, Science 300 (2003) 1275.

[11] J. R. Trelewicz and C. A. Schuh, Acta Mater. 55 (2007) 5948.

[12] J. Schiøtz and K. W. Jacobsen, Science 301 (2003) 1357.

[13] R. Z. Valiev, Adv. Eng. Mater. 5 (2003) 296.

[14] V. Yamakov, D. Wolf., S. R. Phillpot, A. K. Mukherjee and H. Gleiter, Nature Mater. 3 (2004) 43.

[15] C. Rentenberger and H. P. Karnthaler, Acta Mater. 53 (2005) 3031.

[16] J. Y. Huang, Y. T. Zhu, X. Z. Liaoz and R Z. Valiev, Phil. Mag. Lett. 84 (2004) 183.

[17] A. V. Sergueeva, C. Song, R. Z. Valiev and A. K. Mukherjee, Mater. Sci. Eng. A 339 (2003)159.

[18] T. Waitz, V. Kazykhanov and H. P. Karnthaler, Acta. Mater. 52 (2004) 137-147.

[19] X. Sauvage and R. Pippan, Mater. Sci. Eng. A 410-411 (2005) 345.

[20] G. B. Olson, Martensite (G. B. Olson and W. S. Cohen, Eds.) AMS International (1992) p. 1.

[21] C. Mangler, C. Rentenberger, I. Humer, L. Reichhart and H. P. Karnthaler, Micr. Microanal. 13-S03 (2007) 298.

[22] R. Z. Valiev, Nature Mater. 3 (2004) 511.

[23] I. Karaman., A. V. Kulkarni and Z. P. Luo, Philos. Mag A 85 (2005) 1729.

[24] C. Rentenberger, T. Waitz and H. P. Karnthaler, Mater. Sci. Eng. A 462 (2007) 283.

[25] H. P. Karnthaler, T. Waitz, C. Rentenberger and B. Mingler, Mater. Sci. Eng. A 387–389(2004) 777.

[26] J. Koike, D. M. Parkin and M. Nastasi., J. Mater. Res. 5 (1990) 1414.

[27] M. Peterlechner, T. Waitz, I. Moder and H. P. Karnthaler, Micro. Microanal. 13-S03 (2007) 302.

[28] T. Waitz and H. P. Karnthaler, Acta Mater. 52 (2004) 5461.

[29] T. Waitz, T. Antretter, F. D. Fischer, N. K. Simha and H. P. Karnthaler, J. Mech. Phys. Sol. 55 (2007) 419.

[30] T. Waitz, D. Spisak, J. Hafner and H. P. Karnthaler, Europhys. Lett., 71 (2005) 98.

[31] T. Waitz, W. Pranger, T. Antretter and F. D. Fischer, Mater. Sci. Eng. A 481-482 (2008) 479.

[32] V. G. Pushin, V. V. Stolyarov, R. Z. Valiev, T. C. Lowe and Y. T. Zhu, Mater. Sci. Eng. A 410–41 (2005) 386.

[33] B. Kockar, I. Karaman, J. I. Kim and Y. Chumlyakov, Scripta Mater. 54 (2006) 2203.

[34] S. D. Prokoshkin et al., Metal Sci. Heat Treat. 47 (2005) 182.

[35] V. G. Pushin et al., Mater. Trans. 503-504 (2006) 539.