SciELO - Scientific Electronic Library Online

 
vol.18 número1-2Comportamiento tribológico de materiales cerámicos de nitruro de silicio texturadosEstudo da influência das características do contra-corpo na taxa de desgaste do polioximetileno em ensaio pino-contra-disco índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ciência & Tecnologia dos Materiais

versão impressa ISSN 0870-8312

C.Tecn. Mat. v.18 n.1-2 Lisboa jan. 2006

 

Reciprocating lubricated sliding on textured steel surfaces

 

Henara L. Costa, Ian M. Hutchings

 

Institute for Manufacturing, Department of Engineering, University of Cambridge, UK

ltm-henara@ufu.br, imh2@cam.ac.uk

 

ABSTRACT: The presence of a lubricant film between two sliding surfaces reduces adhesion and wear. Engineering surfaces can be textured with a uniform micropattern composed of regularly shaped topographical features, which is expected to improve their lubrication. If the surfaces are sliding against each other with a certain velocity and a lubricant fluid is present in the contact, a hydrodynamic film may form spontaneously between them. In lubricated sliding tests of metallic samples, the two conducting samples can be seen as two conductors separated by a lubricant film, which constitute a capacitor if the two samples are insulated from each other. In this work, a bridge circuit was designed where the capacitor created by the two samples and the lubricant film was one of the components of a bridge. The resistors that compose the bridge were selected in order to provide a large range of linear variation between voltage and capacitance, between approximately 50 and 900 pF and the output was a rectified DC voltage signal corresponding to the average of the resultant AC signal for each film thickness. The apparatus was connected to a reciprocating sliding tester with sinusoidal velocity variation in order to achieve regimes of lubrication varying from boundary to hydrodynamic lubrication over the length of the stroke; the velocity varied between zero at the ends of the stroke and 40 mm s-1 in the middle. Textured samples containing patterns composed of individual circles and lines were tested using this apparatus. The effects of width and percentage of coverage and of feature orientation were analysed. All the results were compared with those from a standard polished surface.

Key words: surface texturing, surface patterning, thick film lubrication, film thickness, capacitance, reciprocating tests.

 

 

Texto completo disponível apenas em PDF.

Full text only available in PDF format.

 

 

References

[1] Becker, E.P. and K.C. Ludema, A qualitative empirical model of cylinder bore wear. Wear, 1999. 225-229: p. 387-404.        [ Links ]

[2] Dubrujeaud, B., M. Vardavoulias, and M. Jeandin, The role of porosity in dry sliding wear of a sintered ferrous. Wear, 1994. 174: p. 155-161.

[3] Steinhoff, K., W. Rasp, and O. Pawelski, Development of deterministic-stochastic surface structures to improve the tribological conditions of sheet forming processes. Journal of Materials Processing Technology, 1996. 60: p. 355-361.

[4] Hamilton, D.B., J.A. Walowit, and C.M. Allen, A theory of lubrication by micro-irregularities. Transactions of ASME, Journal of Basic Engineering, 1966: p. 177-185.

[5] Ronen, A., I. Etsion, and Y. Kligerman, Friction-reducing surface-texturing in reciprocating automotive components. Tribology Transactions, 2001. 44(3): p. 359-366.

[6] Brizmer, V., Y. Kligerman, and I. Etsion, A laser surface textured parallel thrust bearing. Tribology Transactions, 2003. 46(3): p. 397-403.

[7] Mitidieri, P.B. CFD modelling of a low friction hydrodynamic bearing. in Tribology Mission. 2002. London: IMechE.

[8] Wang, X., et al., The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication model from hydrodynamic to mixed. Tribology International, 2001. 34: p. 703-711.

[9] Wang, X., K. Kato, and K. Adachi, The lubrication effect of micro-pits on parallel sliding faces of SiC in water. Tribology transactions, 2002. 45(3): p. 294-301.

[10] Pettersson, U. and S. Jacobson, Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribology letters, 2004. 17(3): p. 553-559.

[11]  Madou, M.J., Fundamentals of Microfabrication. 2nd ed. The Science of Miniaturization. 2002, Florida: CRC Press. 723.

[12] Cochran, D.A., Apparatus and method for electrochemically etching grooves i n an outer surface of a shaft, in USPTO. 2001, Seagate Technology: United States.

[13] Williams, J.A., Engineering Tribology. 1994, Oxford: Oxford University Press. 488.

[14] Hutchings, I.M., Tribology - Friction and Wear of Engineering Materials. 1992, London: Arnold. 273.

[15] Etsion, I., Y. Kligerman, and G. Halperin, Analytical and experimental investigation of laser-textured mechanical seal faces. Tribology Transactions, 1999. 42(3): p. 511-516.

[16] Stachowiak, G.W. and A.W. Batchelor, Engineering Tribology. 2001, Boston: Butterworth-Heinemann. 744.