SciELO - Scientific Electronic Library Online

 
vol.18 número1-2Desarrollo y propiedades de recubrimientos nanocomposities lubricantesRevestimentos de diamante CVD em Si3N4: Atrito e desgaste no deslizamento de pares próprios sem lubrificação índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ciência & Tecnologia dos Materiais

versão impressa ISSN 0870-8312

C.Tecn. Mat. v.18 n.1-2 Lisboa jan. 2006

 

Tribological behaviour of reactive and co-sputtered W-S-C coatings

 

M. Evaristo (1), A. Nossa (2), A. Cavaleiro (1)

 

(1) ICEMS Grupo de Materiais e Engenharia de Superfícies – Faculdade de Ciências e Tecnologia da Universidade de Coimbra – Rua Luís Reis Santos, 3030-788 Coimbra, Portugal

albano.cavaleiro@dem.uc.pt

(2) Escola Superior de Tecnologia e Gestão, Instituto Politécnico da Guarda, Guarda, Portugal

 

 

ABSTRACT: W-C-S films were deposited either by a reactive process in an Ar+CH4 atmosphere or by co-sputtering WS2 and C targets. The films were characterized concerning their chemical composition and mechanical properties. The results showed that the films, in both systems, have similar properties. Co-sputtered films are amorphous, whereas in the reactive process a gradual l oss of cristallinity is observed with the increase of C content in the films. The hardness and the adhesion are similar for both systems. The increase of C alloying to the films led to the improvement of both their hardness and adhesion.

The tribological performance of the coatings was tested by ball-on-disk. The films deposited by co-sputtering present better results than the reactive deposited ones. With the increase of C content in these coatings an increase of the wear resistance is observed, reaching in the best case a wear coefficient of 3.1×10-16 m3/N×m. In the films deposited by reactive process, low wear coefficients can also be reached but no regular trend with increasing C contents can be observed.

Keywords: Tungsten disulfide; WS2; Friction coefficient; Wear coefficient; Self-lubricant

 

 

Texto completo disponível apenas em PDF.

Full text only available in PDF format.

 

 

References

[1] I. L. Singer, S. Fayeulle, P. D. Ehni, Wear 195 (1996) 7-20        [ Links ]

[2] T. Spalvins, Thin Solid Films, 96 (1982) 17-24

[3] P. J. John, S. V. Prasad, A. A. Voevodin, J. S. Zabinski, Wear, 219 (1998) 155-161

[4] A. A. Voevodin, J. P. O’Neill, J. S. Zabinski, Tribology Letters, 6 (1999) 75-78

[5] J. S. Zabinski, J. E. Florkey, S. D. Walck, J. E. Bultman, N. T. McDevitt, Surf. Coat. Technol. 76-77 (1995) 400-406

[6] A. Nossa, A. Cavaleiro, Surf. Coat. Technol. 163-164 (2003) 552-560

[7] A. A. Voevodin, J. P. O’Neill, J. S. Zabinski, Surf. Coat. Technol. 116-119 (1999) 36-45

[8] A. Nossa, A. Cavaleiro, N. J. M. Carvalho, B. J. Kooi, J. Th. De Hosson, Thin Solid Films, 484 (2005), 389-395

[9] A. K. Rai, R. S. Bhattacharya, J. S. Zabinski, K. Miyoshi, Surf. Coat. Technol. 92 (1997) 120-128

[10] M. Hirano, S. Miyake, Applied Physics Letters, 47 (7) October (1985) 683-685

[11] M. Regula, C. Ballif, M. Remskar, F. Lévy, Journal of Vacuum Science and Technology, A 15(4), Jul/Aug (1997) 2323-2329

[12] M. Evaristo, A. Nossa, A. Cavaleiro, Surf. Coat. Technol, 200 (2005), 1076-1079

[13] A. Nossa, A. Cavaleiro, J. Mater. Res. 19 (8) (2004) 2356-2365

[14] A. Nossa, A. Cavaleiro, Surf. Coat. Technol. 142-144 (2001) 984-991

[15] R. Gilmore, M. A. Baker, P. N. Gibson, W. Gissler, M. Stoiber, P. Losbichler, C. Mitterer, Surf. Coat. Technol, 108-109 (1998) 345-351

[16] S. V. Prasad, J. S. Zabinski, Journal of Material Science Letters, 12 (1993), 1413-1415