SciELO - Scientific Electronic Library Online

 
vol.26 número2Estudos eletroquímicos de ligas Ti-Mo de interesse para biomateriais índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Corrosão e Protecção de Materiais

versão impressa ISSN 0870-1164

Corros. Prot. Mater. v.26 n.2 Lisboa abr. 2007

 

Corrosion Inhibition of Cu- Fe Alloys in HCI Solutions by Amphoteric Surfactants

 

S. S. Mahmoud (1)

 

 Abstract

Amphoteric surfactants were tested as corrosion inhibitors for the Cu- Fe alloy corrosion in 1M HCI solutions. Weight – loss, electrochemical polarization, impedance measurements and atomic absorption spectroscopy were the techniques used. The surfactants were alkyl-N- (amino ethylene) – β - aspartamates of molecular formula:

H2 N- ( CH2)2 – HN- CH –COOH , ( R=C10 – C 14 ).

 

                             CH2 CONH-R

These surfactants behave as mixed – type inhibitors, i.e. they affect both the cathodic and anodic reactions without changing their mechanisms. The inhibition action of these surfactants may take place through blocking and hydrophobic effects. The inhibition effect increases with the increase of the alkyl group (-R) length. These surfactants were adsorbed in the alloy surface according to the Frumkin isotherm model. The presences of these surfactants in the aggressive media contribute to increases the values of the apparent activation energy.

Also, these surfactants refer the preferential dissolution of iron from the alloy.

 

Key words: Cu – Fe Alloy, Inhibitors, Galvanostatic Polarization, Frumkin Isotherm, Amphoteric Surfactants.

 

 

Inibição da corrosão de ligas cu-Fe em soluções de HCl através de surfactantes anfotéricos

 

Resumo

Surfactantes anforéticos foram testados como inibidores de corrosão em ligas de Cu-Fe em soluções de 1M HCl. As técnicas usadas foram perda de peso, polarização electroquímica, medidas de impedância e espectroscopia de absorção atómica. Os surfactantes usados foram os b-aspartamatos de N-alquil-(amino etileno) de fórmula molecular:

 

H2N-(CH2)2- HN-CH-COOH, (R=C10-C14).

                           I

                         CH2 CONH-R

Estes surfactantes comportam-se como inibidores tipo “híbridos”, isto é, afectam as reacções catódicas e anódicas sem alterar os seus mecanismos. A acção inibidora destes surfactantes pode ocorrer por efeito hidrofóbico e de bloqueamento. O efeito inibidor aumenta com o aumento do comprimento do grupo alquídico (-R). Estes surfactantes serão adsorvidos na superfície da liga de acordo com o modelo isotérmico de Frumkin. A presença destes surfactantes em meio agressivo contribui para o aumento da energia de activação aparente. Ainda, estes surfactantes referem a dissolução preferencial do ferro da liga.

 

Palavras chave: Liga Cu-Fe, Inibidores, Polarização Galvanostática, Isotérmica de Frumkin, Surfatantes Anfotéricos

 

 

 Texto completo disponível apenas em PDF.

Full text only available in PDF format.

 

References

[1]P. T. GILBERT, Mater. Performance, part 2, p.47 (1982).

[2] F. MANSFELD, G. LIU, H. XIAO, C. TSAI and B. LITTLE, Corros. Sci., 36, 12, 203 (1994).

[3]R. Blundy and M. Pryer; Corros. Sci., 12, 62 (1972).

[4] R. F. North and M. Pryar, Corros. Sci., 10, 297 (1970).

[5] Y. l. Kuzaretsov, Organic Inhibitors of Corrosion of Metals, Plenum Press, New York, E.U.A. (1996).

[6] N. K. Patel, J. France and I. S. Petel, J. Indian Chem. Soc., 54, 815 (1997).

[7] J. Jany and H. Ishida, >Corros. Sci., 33, 1053 (1992).

[8] S. Yoshida and H. Ishida, Appl. Surf. Sci., 89, 39 (1995).

[9] R. Gasparac and E. stupnisek – Lisac, Corrosion, 55, 1031 (1999).

[10] S. Yoshida and H. Ishida, Appl. Surf. Sci., 20, 497 (1985).

[11] R. Gasparac, C. R. Martin and E. Stupnisek-Lisac, J. Electrochem. Soc., 147, 2, 548 (2000).

[12] R. Gasparac, C. R. Martin, E. Stupnisek–Lisac, and Z. Mandic, J. Electrochem. Soc., 147, 3 991 (2000).

[13] M. S Morsi, Y. F. Barakat, R. EL-Sheikh, A.M.Hassan, A.Baraka, Werkst. U. Korros., 44, 304 (1993).

[14] F. Mansfeld, M. W. Kending and S. Tsai, Corrosion, 37, 301 (1981).

[15] F. Mansfeld, M.W.Kending and S. Tsai, Corrosion, 38, 570 (1982).

[16] T. Tsuru, S. Haruyama and B. Gijutsu, J. Jpn Soc. Corros. Eng., 27, 573 (1978).

[17] G. Faita, G. Fiori and D. Salvadora, Corros. Sci., 15, 383 (1975).

[18] A. M. Shams–EL–Din, M. E. El-Dahshan and A. M.Taj-Din, Esalination, 130, 89 (2000).

[19] B. Hammouti, A. Aouniti, M. Talab, M. Brighli and S. Kertit, Corrosion, 51, 411 (1995).

[20] A. Popova, E. Sokolova, S. Raicheva and M. Chrestov, Corros. Sci., 45, 33 (2003 ).

[21] W. Wanlin and M. L. Free , Anti – Corros. Meth. Mat., 50, 3, 186 (2003).

[22] M. El–Achouri, M. R. Infante, F. Izquierdo, S. Kertit, H. M. Gouttaya and B. Nciri, Corros. Sci, 43, 19 (2001).

[23] F. I. Halilova, R. M. Aliguliyev and Z. M. O. Rzaev, Anti-Corros. Meth. Mat., 48, 1, 18 (2001).

[24] F. Bentiss, M. Traisnel and M. Lagrenee, Br. Corros. J., 35, 4, 315 (2000).

[25] N. Hajaji, I. Rico, A. Srhiri, A. Lattes, M. Souflaoui and A. BenBechir, Corrosion, 49, 326 (1993).

[26] L. K. Koopal and J. J. Ralston, Colloid Interface Sci., 2, 362 (1986).

[27] B. W. DeBerry and A. Viehbeck, J. Electrochem. Soc., 133, 30 (1986).

 

 

  (1) Chemistry Department, University College of Girls for Arts, Science and Education, Ain-Shams University, Heliopolis, Cairo, Egypt, e-mail:drsohairr@hotmail.com.

 

 Submitted on July 2006 and accepted on December 2006