Resumen

MUNOT, H.; DESHPANDE, P.  y  MODHERA, C.. Conducting Polypyrrole Coated Rebar in a Carbonated Concrete Pore Solution: Electrochemical Investigations. Port. Electrochim. Acta [online]. 2018, vol.36, n.5, pp.365-375. ISSN 0872-1904.  https://doi.org/10.4152/pea.201805365.

Conducting polypyrrole was synthesized, and applied with a paint coating on a low carbon steel sample. By using linear polarization technique, the corrosion rates of uncoated and painted low carbon steel samples, in 3.5 wt% NaCl, were determined, and found to be 5 mpy and 0.1 mpy, respectively. The uncoated and conducting polypyrrole coated steel samples were immersed in a simulated carbonated concrete pore solution, and electrochemical studies were carried out. The shift of corrosion potential in the positive direction implies that the polypyrrole coating gives corrosion protection to low carbon steel, in the anodic direction. As compared to uncoated low carbon samples, polypyrrole coated low carbon steel samples exhibited higher impedance values, but their corrosion resistance decreased with increasing chloride ions in a carbonated pore solution.

Palabras clave : corrosion; carbonated concrete pore solution; rebar; conducting polypyrrole.

        · texto en Inglés     · Inglés ( pdf )