SciELO - Scientific Electronic Library Online

 
vol.32 número3Effect of Operating Parameters on Electrochemical Degradation of Alizarin Red S on Pt and BDD Electrodes índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Portugaliae Electrochimica Acta

versão impressa ISSN 0872-1904

Resumo

RODRIGUES, A. et al. Environmental Application of the BaPb0.9Sb0.1O3 Perovskite: Guaiacol Electrodegradation. Port. Electrochim. Acta [online]. 2014, vol.32, n.3, pp.243-252. ISSN 0872-1904.  http://dx.doi.org/10.4152/pea.201403243.

The perovskite BaPb0.9Sb0.1O3 was prepared through the ceramic route and, after being chemical, structural and electrochemically characterized, it was used in the electrochemical oxidation of guaiacol, using Na2SO4 as electrolyte, at current densities of 5 and 10 mA cm-2 and initial guaiacol concentrations of 50, 100 and 200 mg L-1 . The guaiacol degradation was followed by UV-Visible absorbance measurements, Chemical Oxygen Demand (COD) tests and Dissolved Organic Carbon (DOC) analysis. The combustion efficiency was also determined. Results have shown COD removals between 40 and 85 % and DOC removals from 34 to 66 % after 120 h assays. The absolute COD and DOC removals increase with guaiacol initial concentration and applied current density. The mineralization tendency, measured as the combustion efficiency, was maximum for the applied current density of 10 mA cm-2 and a guaiacol initial concentration of 200 mg L-1.

Palavras-chave : Electrochemical degradation; Guaiacol; Perovskite; BaPb0.9Sb0.1O3.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons