SciELO - Scientific Electronic Library Online

 
vol.22 número3-4Utilization of Durability Criterion to Develop Automotive ComponentsCaso de Estudo: Análise mecânica e fractográfica de um cabo de aço pré-esforçado índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ciência & Tecnologia dos Materiais

versão impressa ISSN 0870-8312

Resumo

MOREIRA, P M G P; RICHTER-TRUMMER, V; FIGUEIREDO, M A V de  e  CASTRO, P M S T de. Comportamento à fadiga de painéis aeronáuticos fabricados por processos emergentes. C.Tecn. Mat. [online]. 2010, vol.22, n.3-4, pp.53-57. ISSN 0870-8312.

The need for lower cost and the emergence of adequate welding technologies has brought interest in large integral metallic structures for aircraft applications; however, in integral structures, a crack approaching a stiffener propagates simultaneously in the skin and into the stiffener and breaks it. The use of manufacturing techniques such as high speed machining (HSM), laser beam welding (LBW) and friction stir welding (FSW) requires further experimental and numerical work concerning the fatigue behaviour of panels manufactured using those processes. A testing programme including fatigue crack growth rate characterization in panels fabricated using HSM, LBW and FSW was performed. Data obtained at IDMEC-Porto testing panels under load ratio R (min. load / max. load) of 0.1 and 0.5 is presented, and the performance of panels manufactured using the different processes is discussed and compared. The work was developed in the frame of the European Union DATON project.

Palavras-chave : Fatigue crack growth; Forman law; residual stress; stiffened panels.

        · resumo em Português     · texto em Português     · Português ( pdf )