SciELO - Scientific Electronic Library Online

 
vol.31 número3-4Comportamento corrosivo de ligas de al e al-li usadas como materiais aeronaúticosEstudo da corrosão da tubagem à saída de um permutador de calor num sistema industrial de co-geração índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Corrosão e Protecção de Materiais

versão On-line ISSN 2182-6587

Resumo

ABREU, F.; SABARIZ, A.; QUADRO, A.  e  BUENO, A.. Evaluation of corrosion resistance of 6101 aluminum alloy after differents precipitation heat treatment. Corros. Prot. Mater. [online]. 2012, vol.31, n.3-4, pp.65-70. ISSN 2182-6587.

Currently, 6xxx series aluminum alloys have been occupying an important place in the global production of aluminum alloy. The wide use of this class of alloys is a result of improvement on mechanical properties when subjected to heat treatments. However, the thermal treatments of solubilization and precipitation of metastable phases during aging may impair the corrosion resistance of this class of alloys. The present study aims to evaluate the corrosion behavior of aluminum alloy 6101 after heat treatment of solubilization by testing over time and anodic polarization curves. The formation of pits was evaluated by scanning electron microscopy (SEM). Solutions of 3.5 % NaCl and 0,1 M Na2SO4 were used in order to simulate conditions of high aggressiveness.

Palavras-chave : Aluminum Alloys; Pitting Corrosion; Heat Treatment of Solubilization.

        · resumo em Português     · texto em Português     · Português ( pdf )